View source for MQTT Push

To setup a regular data push from specific Domoticz devices to a MQTT Broker/Server you go to '''Setup - More options - Data Push - MQTT'''

'''Prerequisite''': An accessible MQTT Broker/Server to connect to.


You can add the individual devices you want to send to MQTT in the ''Edit Link'' section

* Device name: Select the device from wich the data has to be send to Influxdb
* Value to Send: Some devices have multible values eg Temperature, Humidity barometer pressure. Select here the value to send.
* Target type: What triggers the send to influxdb action:
** On value change: Only when the updated value is different from the previous.
** Direct: After each update in Domoticz, changed or not
* Link Active: Yes/No

In the ''General Settings'' section you can enter the details of the MQTT Broker/server you can connect to.

* Remote adress: (IP) adress of the MQTT server
* Port
* Username for the MQTT server
* Password for the MQTT server
* Topic Out Prefix (eg DomoHome)
* CA file name, default empty (only needed when a certificate is needed)
* TLS Version, default tlsv1.2 (only change when needed)